Fits either LH (Driver Side) or RH (Passenger Side) FRONT Fits 8 Lugs Wheels Wheel studs already installed Includes ABS with tegral Sensor. Brand New Wheel Hub Assembly.
Built to strict quality control standards. Front Driver Or passenger Wheel Hub And Bearing Assembly Fits 02-07 Saturn Vue. 2 Pcs wheel hub bearing. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove cotter pin and the nut retainer, Loosen the wheel hub lock nut from the drive shaft using power tool. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing. Remove the engine side cover.
Remove the lower nut and bolt from the steering knuckle, Separate transverse link from steering knuckle. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire. Remove the wheel hub and bearing bolts using power tool. Remove the splash guard and the wheel hub and bearing from the steering knuckle. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor.Pull out the front wheel sensor, being careful to turn it as little as possible. Do not pull on wheel sensorharness. Inspection after removel : Check components for deformation. And boots of transverse link ball joint for cracks. Axial end play, and swing torque. Installation is in the reverse order of the removal. Do not reuse the wheel stud. Do not reuse the cotter pin. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B). Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing.
Apply lubricant to the surface (A) of the joint sub-assembly. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut.
Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.Too much torque causes axle noise. Too little torque causes wheel bearing looseness.
Tighten the wheel hub lock nut to the specification. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.Driver Side or Passenger Side Front. Has ABS with tegral Sensor. 3C342B513BA, 3C342B513BB, 3C342B513BC, 3C342B513BD, 3C3Z1103BA. Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug. For 88-98 Chevy GMC 1500/2500/3500 Towing Mirrors Manual Side Mirrors Truck Pair. 2x New Keyless Entry Remote Car Key Fob Clicker Transmitter Control For Ford. Pair (2) Front Wheel Bearings Hub for Chevy Impala Pontiac Grand Prix Bonneville.
Cab Marker Roof Running Light. UTV & ATV Brake System Parts. Brake Caliper & Rotors Pads. Nerf Bars & Running Boards. Wheel Stem Air Valve Cap.
Splash Guards & Mud Flaps. 4 pcs wheel hub bearing. Car Window Film Tint Tools. ECCPP For 06-09 SUZUKI GRAND VITARA RH Side Black Foldaway Power Heated Mirror. Fits 2001-05 Dodge Stratus Coupe Mitsubishi Eclipse 2x Throttle Position Sensor.
H11+ H7 LED Headlight High Low Beam Lights 1960W 294000LM 6500K High Power. The item "2 Front Wheel Hub & Bearing Assembly For Ford Excursion F-250 f-350 Super Duty" is in sale since Monday, September 19, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Wheel Hubs & Bearings". The seller is "eccppautoparts" and is located in Ontario, California.
This item can be shipped worldwide.